CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Hexa volume meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 24, 2008, 22:49
Default Hexa volume meshing
  #1
Sam
Guest
 
Posts: n/a
Hi all,

I'm currently a final year student undertaking a thesis project on a submarine. I'm new to ICEM CFD. I've been given a geometry (tetin, tin?) file with a blocking file. I need to create a Hexahedral mesh and transfer this to CFX. If anyone could give me any guidance or tips with this it would be much appreciated. I'm using version 11.0.

Thanks,

sam
  Reply With Quote

Old   March 25, 2008, 07:50
Default Re: Hexa volume meshing
  #2
frank
Guest
 
Posts: n/a
since you have geometry and block file in hand, you can pre-mesh the geometry and check the quality of the mesh to meet you require. then convert the mesh to nonstructure mesh. finally output to cfx.namely, click the output button,select the ansys cfx slover.

by the way,you can read the tutorial about this problem.
  Reply With Quote

Old   March 27, 2008, 21:34
Default Re: Hexa volume meshing
  #3
Rogerio Fernandes Brito
Guest
 
Posts: n/a
There´s a file on Emule in pdf format. Give a look there!
  Reply With Quote

Old   March 27, 2008, 21:37
Default Re: Hexa volume meshing
  #4
Rogerio Fernandes Brito
Guest
 
Posts: n/a
the name of the file is "Ansys ICEM CFD 10.0 Manual.pdf"
  Reply With Quote

Old   March 28, 2008, 05:25
Default Re: Hexa volume meshing
  #5
Sam
Guest
 
Posts: n/a
Thanks all for your responses. Greatly appreacited, thankyou.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Hexa meshing of impeller and diffuser assembly Nitin Dewangan ANSYS Meshing & Geometry 14 September 13, 2016 10:41
Error at Volume Meshing (Interface problem) Trofrensis STAR-CCM+ 7 December 27, 2009 16:54
Hexa Block meshes in ANSYS Meshing? siw ANSYS Meshing & Geometry 3 July 31, 2009 11:40
Meshing volume Eduardo FLUENT 0 March 15, 2006 14:20
volume meshing nikita FLUENT 5 June 30, 2003 06:11


All times are GMT -4. The time now is 08:29.