CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

prism height linear variation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 31, 2008, 17:40
Default prism height linear variation
  #1
nick
Guest
 
Posts: n/a
Hi

Can anyone tell me if it is possible to use the prism function to create a linear variation in inflation layer height, as I am wanting to allow for a constant Yplus value.

cheers nick
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Fixing tetra Surface Orientations after prism generation siw ANSYS Meshing & Geometry 14 December 1, 2015 16:54
[ICEM] Element sizing question siw ANSYS Meshing & Geometry 4 January 22, 2015 10:11
[ICEM] Error in Prism Ratio Computed singer1812 ANSYS Meshing & Geometry 0 September 22, 2011 17:29
solution diverges when linear upwind interpolation scheme is used subash OpenFOAM 0 May 29, 2010 02:23
Varying prism height nick CFX 0 April 2, 2008 21:31


All times are GMT -4. The time now is 22:27.