CFD Online Logo CFD Online URL
Home > Forums > CFX

ICEM-2D-Hybrid Mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 29, 2008, 03:11
Default ICEM-2D-Hybrid Mesh
Posts: n/a
Hi Folks!

hope someone is able to help me...

I've got an 2D airfoil which should have a hexa-mesh at the complete surrounding boundry. lets say for approx. 5 layers.

around that, my mesh should be the less exact tetra-mesh for the surrounding space.

if it's not really clear, check out following link... it's actually EXACTLY my problem!

so... what I wanted to do is to block the airfoil and generate an O-Grid around these blocks. then I deleted all the external and internal block (copied to VORFN) so that the rest of my blocks would only be my O-Grid which should be associated with my airfoil spline. when I press on "pre-mesh" it shows me a few layers and thats it.

how do I generate a "normal" grid, as used in tetra?

and then .... how do I create a treta mesh which connects to my hexa mesh?

thanks dudes!

  Reply With Quote

Old   May 24, 2008, 06:06
Default Re: ICEM-2D-Hybrid Mesh
Jeevan kumar
Posts: n/a
what is shown in the picture is not the hexa layers, they are prism layers followed by the tetra mesh. to create a prism layer, first you have to create the tet mesh and then define the prism layers. there is a tutorial for creating prism layer in ICEM, check it out

with regards jeevan kumar
  Reply With Quote

Old   May 24, 2008, 07:28
Default Re: ICEM-2D-Hybrid Mesh
Rogerio Fernandes Brito
Posts: n/a
U can use cfx meshing to create the tetra mesh (with prism mesh) and not the icem cfd!
  Reply With Quote

Old   March 5, 2011, 17:44
Senior Member
Ugly Kid Joe
Join Date: Aug 2010
Posts: 193
Rep Power: 7
vmlxb6 is on a distinguished road
I am stuck where exactly icem-noob is stuck.

I am trying to simulate the flow over a cylinder.

I got the o-grid mesh around the cylinder but how do I get tri meshes in the surrounding region and also how do I connect the tri & o-grid meshes ???

Any kind of help is appreciated.
vmlxb6 is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Negative volume error in hybrid mesh siw ANSYS Meshing & Geometry 4 September 3, 2014 05:25
Export 2D mesh from ICEM to Fluent BuilttoSpill ANSYS Meshing & Geometry 4 August 28, 2010 08:16
problem when converting mesh (made by ICEM) using fluentMeshToFoam Forrest_Lei OpenFOAM 11 October 16, 2009 06:28
Hex-Tet Mesh Merge in ICEM Tristan CFX 1 September 26, 2008 05:40
ICEM 10 mesh question DAK565656 CFX 6 May 8, 2007 12:16

All times are GMT -4. The time now is 13:25.