CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Convergence issue in SST for Porous model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 2, 2008, 03:43
Default Convergence issue in SST for Porous model
  #1
Raj
Guest
 
Posts: n/a
I would like to thank in adavance for reading this It would be helpful if you can suggst me to solve my problem.

Actually I am trying to solve porous model problem (with Isotropic loss model of porosity & using linear and quadratic coefficients) with SST. I have tried with steady state and it was not converging. Then, again I tried with transient also. But I couldn't get the convergence that I set RMS to 10-4. I used almost default settings in the solver part.

I could get the convergence with K Epsilon. But not in the SST even with mesh refinements. FYI.. I have used tetra with prism layers.

Looking forward to hear your suggestions to get the convergence.

Thanks

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Superlinear speedup in OpenFOAM 13 msrinath80 OpenFOAM Running, Solving & CFD 18 March 3, 2015 06:36
Missing Information in SST Transition Model Formulation Josh CFX 2 September 14, 2010 12:49
Convergence issue Omer CFX 2 March 7, 2007 11:37
about Y+ in SST model zuozicheng CFX 2 July 12, 2005 11:05
SST model help please! Sheila Siemens 2 September 6, 2004 23:39


All times are GMT -4. The time now is 01:25.