CFD Online URL
[Sponsors]
Home > Forums > CFX

CFX-Boundary conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 2, 2008, 07:04
Default CFX-Boundary conditions
  #1
Elena Saldaeva
Guest
 
Posts: n/a
Hello, everyone

I am doing permeability testing in textiles using CFX 10.0. I used TexGen to create unit cell and I also used it for meshing. When I input meshed geometry which is block and yarns inside it and tried to create boundary conditions I got a problem. I cannot separate faces in block so I can create input pressure and output pressure. So I was trying to find another option, maybe to create another surface above my unit cell so I can create boundary conditions there. I still don't know how to do this. If you have any idea, please let me know. I will be very thankful for any reasonable advice.

Kind regards, Elena
  Reply With Quote

Old   May 2, 2008, 09:24
Default Re: CFX-Boundary conditions
  #2
AAMIR M SHAIKH
Guest
 
Posts: n/a
i am doing simulation on electro_osmotic flow microchannnel pump using CFX10.0 it is 2D Simulation there is problem to boundary condition- 1)how to give gredient zero for inlet and outlet e.g. velocity gradient du/dx=0,dv/dx=0

pressure gradient dP/dx=0

electric potential d(si)/dx=0
  Reply With Quote

Old   May 6, 2008, 18:12
Default Re: CFX-Boundary conditions
  #3
Craig Hildreth
Guest
 
Posts: n/a
I am not sure what the above post has to do with the original question. Please start a new thread rather than highjack.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 34 October 16, 2014 06:27
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
boundary conditions and mesh exporting vaina74 Open Source Meshers: Gmsh, Netgen, CGNS, ... 2 May 27, 2010 10:38
mesh file for flow over a circular cylinder Ardalan Main CFD Forum 6 April 18, 2010 00:40
Fluent accuracy and boundary conditions Paolo Lampitella FLUENT 0 June 12, 2008 07:25


All times are GMT -4. The time now is 23:12.