CFD Online Logo CFD Online URL
Home > Forums > CFX


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 28, 2008, 11:05
Default ICEM 2 CFX
Posts: n/a
how do I export the mesh WITH splines and points into CFX?

I got an unstructured mesh, with a rotating domain. the problem is, that I can't export my axis!!

on the other side ... how do I create an axis in CFX, if the export doesnt work?!

(I have a 2-D case)

thx for help!
  Reply With Quote

Old   May 28, 2008, 22:42
Default Re: ICEM 2 CFX
Glenn Horrocks
Posts: n/a

CFX only imports mesh. I cannot import lines and points.

To create an axis you have to type the point locations into CFX. It would be nice to have it carry over but at the moment you can't do it.

  Reply With Quote

Old   May 29, 2008, 03:17
Default Re: ICEM 2 CFX
Posts: n/a

but thanks for info!
  Reply With Quote

Old   May 31, 2008, 12:30
Default Re: ICEM 2 CFX
Posts: n/a
What you need to do is, make your geometry such that the domain which you want to rotate should made with reference to a axis, later when you import the same in CFX, you need not to have axis to be incorporated.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Import Mesh from ICEM CFD to CFX Andre Almeida CFX 10 April 20, 2014 15:33
CFX and ICEM CFD - structured meshes realanony87 CFX 10 May 15, 2009 05:17
ICEM for CFX Al Mazdeh CFX 7 April 5, 2008 06:32
Ansys CFX 11 FSI and ICEM Sheeko CFX 3 November 16, 2006 07:42
Import a rectangular domain into CFX 5.7 from ICEM SKLam CFX 9 March 8, 2006 01:47

All times are GMT -4. The time now is 22:52.