CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

coal particles in air flow error

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 20, 2008, 09:50
Default coal particles in air flow error
  #1
Jane
Guest
 
Posts: n/a
I put cpal particles in air flow to see the particle distribution in a bend. the temperature is 90C for both. But when I finish PRE, an error says

'The parameter "Binary Mixture Material" in "/LIBRARY/MATERIAL:HC Fuel/MIXTURE MATERIALS" holds the following disallowed value: "HC Fuel Gas Binary Mixture". (Allowed values are: "".)'

please tell me if anybody knows how to deal with this. many thanks

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CGNS Compiling Diego Main CFD Forum 17 December 21, 2014 02:40
How to install CGNS under windows xp? lzgwhy Main CFD Forum 1 January 11, 2011 19:44
OF 1.6 | Ubuntu 9.10 (64bit) | GLIBCXX_3.4.11 not found piprus OpenFOAM Installation 22 February 25, 2010 14:43
OpenFOAM on MinGW crosscompiler hosted on Linux allenzhao OpenFOAM Installation 127 January 30, 2009 20:08
Problem with compile the setParabolicInlet ivanyao OpenFOAM Running, Solving & CFD 6 September 5, 2008 20:50


All times are GMT -4. The time now is 09:02.