CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   icem hexa mesh beginner (http://www.cfd-online.com/Forums/cfx/26005-icem-hexa-mesh-beginner.html)

icem beginner June 23, 2008 19:31

icem hexa mesh beginner
 
hello, i am beginner in ICEM CFD.i have to simulate a flow over a NACA0015 airfoil.i have the final blocking.but when computing with pre-mesh,all geometry(the external flow+internal surface of airfoil)will be meshed.then i have to avoid the internal airfoil mesh. please,i will be grateful to receive any idea. thanks.

pratik mehta June 24, 2008 02:12

Re: icem hexa mesh beginner
 
You have to go to edit mesh option , apply flood field , here you can save the mesh in the region you want.

icem beginner July 9, 2008 07:18

Re: icem hexa mesh beginner
 
thanks pratik mehta. but what i have got in "edit mesh :flood field is concerning tetra mesh only.and i dont get it for the hexa mesh. but i have done it easly with an other manner.whith deleting block.

Amit July 23, 2008 04:26

Re: icem hexa mesh beginner
 
use create part option from parts.Name the part and add the airfoil block to it.While doing pre-mesh switch off airfoil part.This will solve the problem.Just check.


All times are GMT -4. The time now is 05:37.