[CFX Post] : Wireframe, ...
 

Hi, I have a geometry divided in 7 domains. My simulation converged well in CFX-Solver.

When I want to load the .res file in CFX-Post, I get the following :

- If I choose to load all the domains, I get nothing... No wireframe, .... I can't plot streamlines, ... When I want to use "Turbo", only the first four domains are available. There is no sign of the last 3 ones.

- If I choose to load only the first four domains then it worked well...

Any ideas why I get such a behaviour. What could be wrong with the last three domains ?

Regards,

Hervé

Re: [CFX Post] : Wireframe, ...
 

Dear pal,

In Turbo mode you can only visualize those components which are pertaining to Turbomachinery blades.

For example in a Francis Turbine, you can only visualize guidevanes & runner. Its not possible to the see casing & draft tube.

Also you can only initialize blade components, after initializing you will be seeing a fan like logo at those components which the turbo can identify & the rest will be in red colour.

I hope I have understood your problem correctly.

Regards,

Amit Roghs