CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Transient forces routines (CFX v.11)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 15, 2008, 08:48
Default Transient forces routines (CFX v.11)
  #1
Jesus De Andrade
Guest
 
Posts: n/a
I am performing some transient calculations on a compressor and I need to extract the nodal forces on a wall boundary at each timestep into a file with the following information:

#Node X Y Z Fx Fy Fz

I can not set up outputs of cartesians forces at each node for each timestep from CFX-Pre. I suppose that I need to perform a subroutine into the commandos' line in order to do that but I have never done that. I hope that someone can help me with this.

Thanks in advance for reading and helps.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Proper way to name boundaries on 2D model for use in CFX? RossFS ANSYS Meshing & Geometry 4 November 10, 2011 03:38
Pros and Cons for CFX, CFdesign, COMSOL Val Main CFD Forum 3 June 10, 2011 02:20
Monitoring points or planes in transient CFX simulations jwillie2000 CFX 6 May 20, 2011 16:20
CFX: How to save variables of boundary domain of transient run and use it as input papanef CFX 5 November 10, 2010 17:31
CFX 4.4 installation problem Pandu Sattvika CFX 1 December 1, 2001 05:07


All times are GMT -4. The time now is 02:13.