CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

surface in icem cfd

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 22, 2008, 17:45
Default surface in icem cfd
  #1
Rogerio Fernandes Brito
Guest
 
Posts: n/a
How to create a surface with these following points?

0.19535 1.10790 4.7

0.23315 1.13641 4.7

0.30315 1.10939 4.7

1.06230 0.48530 4.7

2.59310 0.49330 4.7

2.78100 0.45310 4.7

2.90070 0.26580 4.7

2.89798 0.00000 4.7

0.95340 0.00000 4.7

0.15340 0.80000 4.7

0.16556 0.93892 4.7

The points above will be inside a square of 12.7 mm x 12.7 mm with 0.8 mm of fillet radius.

Thanks for helping me.

  Reply With Quote

Old   July 22, 2008, 17:46
Default Re: surface in icem cfd
  #2
Rogerio Fernandes Brito
Guest
 
Posts: n/a
In the z direction, i have 4.7 mm of dimension!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ICEM CFD 5.0 (Hexa) - Internal Wall/Thin Surface James Date CFX 3 August 10, 2012 04:47
icem cfd ai environment 11.0, laptop keyboard problem, linux pertupd Hardware 3 October 3, 2011 08:27
[ICEM] Problems with coedge curves and surfaces tommymoose ANSYS Meshing & Geometry 0 August 5, 2011 16:02
boundaries with gmshToFoam‏ ouafa Open Source Meshers: Gmsh, Netgen, CGNS, ... 7 May 21, 2010 12:43
ICEM CFD Modules Boris FLUENT 1 March 12, 2004 15:37


All times are GMT -4. The time now is 22:27.