CFD Online Discussion Forums

CFD Online Discussion Forums (
-   CFX (
-   -   CFX/WB mapping (

Karil August 7, 2008 11:14

CFX/WB mapping
Hi, I have done a transient simulation in CFX with two domains and a rotor moving mesh. Now I need to map the pressure results of the rotor into the structural model, but since the rotor model rotates the 'CFX pressure' function in Workbench Simulation doesn't map the right values, except when the rotor and structural model positions match. Is there a way of keeping the rotor's original coordinates while still realising a transient simulation? A frozen rotor approach isn't adequate for my problem. Does someone have experience in this? Thanks!


Karil August 7, 2008 11:30

Re: CFX/WB mapping
I forgot to tell, because of the computer cluster this is done in CFX 10.0, and after the CFD simulation is over I work with Workbench 11.0. Thanks

Karil August 8, 2008 08:28

Re: CFX/WB mapping
Found it, I altered the THETA_SHIFT_REL number value to 0 in the .trn files with a hex editor!

All times are GMT -4. The time now is 04:39.