CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Surface Mesh in Workbench

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 26, 2008, 09:43
Default Surface Mesh in Workbench
  #1
John S.
Guest
 
Posts: n/a
I was wondering if there was anyway to either seed or specify an element type for a particular 2D region in the Workbench CFX mesher. I have a tet mesh that I am going to mate with a hex mesh and I wanted to specify pyramid elements at the interface to make mating the two grids easier. Any thoughts?
  Reply With Quote

Old   August 26, 2008, 19:47
Default Re: Surface Mesh in Workbench
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

No, this cannot be done. To get transition pyramid elements you need to mesh the enitre thing inside the normal workbench mesher.

Glenn Horrocks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with Gmsh nishant_hull Open Source Meshers: Gmsh, Netgen, CGNS, ... 18 April 22, 2015 08:43
[ICEM] Using Surface Mesh from ANSA for Fluent Sim tommymoose ANSYS Meshing & Geometry 14 August 16, 2011 11:20
[ICEM] Automatic mesh generation script surface intersection problem stuart23 ANSYS Meshing & Geometry 0 May 13, 2011 01:10
Surface aligned mesh rpasiok OpenFOAM Meshing & Mesh Conversion 6 January 7, 2008 06:55
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09


All times are GMT -4. The time now is 05:32.