CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Impinging Jet in ICEM - Negative volume (http://www.cfd-online.com/Forums/cfx/26343-impinging-jet-icem-negative-volume.html)

Stuttgart September 3, 2008 05:57

Impinging Jet in ICEM - Negative volume
 
Hi everybody,

I have been trying to simulate an impinging jet on a circular plate. The impinging jet comes out from a slot above the plate.

My domain is cylindrical. I did an O-Grid around the slot.

When the meshing of the height-edge is uniform, then the quality of the mesh is best. But everytime that I change the law from uniform to another like geometrical 1 or Poisson, I get very bad angles and negative volumes.

I need to get the first spacing very small in order to simulate correctly the near wall domain. It can't happen with uniform mesh.

I have been stucking there for 3 weeks! Please help me if you have any idea.

Thank you in advance.

sanjay pawar September 19, 2008 09:11

Re: Impinging Jet in ICEM - Negative volume
 
have u tried density function for meshing? If uniform meshing is complex then dont do that. now think for unstructred meshing with density function, or try to make different domains and differnt scale meshing for domains. try it



All times are GMT -4. The time now is 16:20.