CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

ICEM

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By johnny

Reply
 
LinkBack Thread Tools Display Modes
Old   September 13, 2008, 01:32
Default ICEM
  #1
ramakrishna
Guest
 
Posts: n/a
ALL, WHAT IS MEANT BY RUNNING CUTTER,THIS MESSAGE I SAW WHEN EVER A RUNNING AT ICEM AT THE MIDDLE OF RUNNING SHOWING.
  Reply With Quote

Old   September 13, 2008, 17:04
Default Re: ICEM
  #2
johnny
Guest
 
Posts: n/a
Your caps lock key is stuck on.

When ICEM builds a mesh (using Octree) it starts with one element in the middle and grows the elements until they hit the surfaces. The cutter then cuts every element that intersects a surface. The portions of the cut elements that are outside of the domain are then discarded.
Chong070940103 likes this.
  Reply With Quote

Old   September 13, 2008, 23:32
Default Re: ICEM
  #3
ramakrishna
Guest
 
Posts: n/a
mr.johnny, ok,my geometry size:diameter 800mm thickness:2mm,in that i will give tetra mesh i given already,in that running cutter is showing i am thinking i given input parameter wrongs(mesh element size) in that geometry how to give mesh element size,any standared is there,please help me. thankyou.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] Workbench 13: Structured Hexa Meshes rooftop ANSYS Meshing & Geometry 19 March 31, 2016 02:33
PEM Fuel cell module meshes. ICEM vs workbench aarvay FLUENT 22 January 26, 2016 00:47
Design Modeler to ICEM..... Joe CFX 0 January 24, 2008 04:39
ICEM 10 mesh scale foe CFX Korsh Mik CFX 2 October 7, 2005 09:07
ICEM CFD 5.1 Hex-Tet mesh merging failure bogesz CFX 1 January 29, 2005 07:46


All times are GMT -4. The time now is 16:49.