CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   floating point exception (http://www.cfd-online.com/Forums/cfx/26636-floating-point-exception.html)

mojtaba November 10, 2008 03:35

floating point exception
 
hi everybody I tried to model a viscous flow by "pressure inlet" and "pressure outlet" in CFX 5. But there is a trouble and CFX announced "floating point exception" and suddenly solve is terminate with error. I can't solve my problem. I studied CFX manual. It offers that applicants should use "velocity inlet"! But my problem is that I have to use "pressure inlet". I applied inlet, outlet and opening boundary conditions together but solve failed too soon. What can I do? I would be very grateful for any advice.


Adam November 10, 2008 05:06

Re: floating point exception
 
I would try running with a different scheme or timestep. Often its the path the mathematics take to arrive at the converged solution which causes the problem. Trying a different scheme or timestep alters the path slightly, which sometimes avoids this.

Or you can try using double precision.

Cheers

Adam

Mojtaba November 15, 2008 07:58

Re: floating point exception
 
Hi and thank for your attention I studied your comment. I'll try to solve my problem in regard to your advice. I'll announce you results. Good luck.



All times are GMT -4. The time now is 06:32.