CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

a serious problem on a case with attack angle

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 18, 2008, 05:28
Default a serious problem on a case with attack angle
  #1
anne
Guest
 
Posts: n/a
hi, there,

I am investigating the effect of attack angle on boundary layer flow (with transition model in CFX). The angle is 4 degree, I rotate the geometry (to 4 degree) and remesh in pre, then run it in solver. everything is all right untill I stop it and save the results. I got some error message, like c-fpx-handler: floating point exception: overflow, or sth else. then the result canbe save as a .res file. however, in which, not all the results are available, i.e. only part of the results have been saved. I don't know what's wrong with it? does anybody have any idea on it? please advice.

thanks, anne
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
problem with reading case file gmwsy FLUENT 3 February 2, 2013 01:25
convergence problem when use pisoFoam, LES for wind tunnel case Forrest_Lei OpenFOAM 3 July 19, 2011 06:00
convegence problem with high angle of attack littlelz CFX 2 October 28, 2009 07:07
Unreal vortices in NACA0012 at high angle of attack parvez2683 FLUENT 1 September 18, 2009 12:27
fluent udf problem for 3d case srsahu Fluent UDF and Scheme Programming 0 July 28, 2009 07:25


All times are GMT -4. The time now is 13:48.