CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

subsonic inlet or supersonic inlet?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 28, 2008, 21:57
Default subsonic inlet or supersonic inlet?
  #1
mali
Guest
 
Posts: n/a
hi,everyone: I am trying to model a multiphase flow which contains two phases.At one of inlets,one phase is subsonic with its volume fraction equal to 1,and at the other inlet,the other phase is supersonic with the whole volume fraction,so what kind of inlets should I select for each of these two inlets, supersonic or subsonic? Please to help me,THANKS IN ADVANCE!

BEST REGARDS
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Probelm with supersonic exhaust to ambient newj CFX 2 August 9, 2012 19:01
supersonic flow at inlet and subsonic flow at outlet deep CFX 3 March 14, 2011 17:02
CFX problems with supersonic inlet condition - Inlet values in CFX-Post are wrong jannnesss CFX 5 February 25, 2011 17:24
Supersonic or subsonic BC? kepler Main CFD Forum 4 September 25, 2009 06:24
B.C. for Supersonic inlet ? jakjak CFX 1 December 3, 2007 16:27


All times are GMT -4. The time now is 01:33.