CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Memory error (http://www.cfd-online.com/Forums/cfx/26857-memory-error.html)

VSB December 31, 2008 06:26

Memory error
 
Hi all,

This is the error I get

************************************************** **********

solver-pvm.exe - Application error

The instruction at "0x039a178f" referenced memory at "0x1af7ca38". The memory could not be "read"

************************************************** **********

Any suggestions?

Regards, VSB

whiz January 2, 2009 05:43

Re: Memory error
 
I guess you made some mistakes on boundary conditions.

Glenn Horrocks January 5, 2009 06:31

Re: Memory error
 
Hi,

whiz is right - it probably means you are incorrectly calling a CEL expression or giving a incorrect CCL value. Have a close look at the CCL you have written. Check it by running it through CFX-Pre.

Glenn Horrocks


All times are GMT -4. The time now is 21:16.