CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   input to boundary condition (http://www.cfd-online.com/Forums/cfx/26860-input-boundary-condition.html)

NVSD BABU January 3, 2009 06:38

input to boundary condition
 
HI all

i have the heat transfer coefficient values in a 3d domain(like (0,0,0,.5)(-.1,.1,.2,4)) how to give this as boundary condition in CFX.

Rikio January 3, 2009 20:42

Re: input to boundary condition
 
Hi, Babu,

What do you mean HTC values as (0,0,0,.5)(-.1,.1,.2,4)? Do you want to specify HTC for a point? If no, you can set HTC for a wall in the wall boundary details tab. Take a look at the heat transfer option. Of course, you have to active the energy equation.

Good luck.

Rikio

Johnson January 4, 2009 13:07

Re: input to boundary condition
 
Hi,

you can use a 3D profile file to define the boundary condition. The format of the profile file is (x,y,z,variable1, variable2, etc...).

See the user documentation for more details on how to apply this to your case.

Regards,

Johnson


All times are GMT -4. The time now is 10:09.