CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Can anybody??? (http://www.cfd-online.com/Forums/cfx/26874-can-anybody.html)

NVSD BABU January 7, 2009 05:10

Can anybody???
 
Hi i have a simple problem, one vertical flat plate enclosed in a enclosure.Enclosure allfaces are adiabaic except bottom face which is opened for air circulation,plate is heated by passing electrical current.From electrical current and resistance and volume of the plate volumetric heat generation is obtained.we are interested at tempertures on the plate. we have tried in cfx by varying differnt options but we did not get the converged or consistent results. one of my question is can CFX solve this type of problems, if answer is yes try to solve this problem.

Thanks NVSD BABU

Glenn Horrocks January 7, 2009 17:30

Re: Can anybody???
 
Hi,

It is very likely that a steady state simulation will not work, you will need a transient simulation. Natural convection simulations like this often lead to large scale transient effects which a turbulence model cannot "smooth" out.

Glenn Horrocks


All times are GMT -4. The time now is 23:40.