CFD Online Logo CFD Online URL
Home > Forums > CFX

ICEMCFD - Prism, Advanced Parameters

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 16, 2009, 12:02
Default ICEMCFD - Prism, Advanced Parameters
Posts: n/a
Hello everyone,

two more short questions just came to my mind. In ICEMCFD 11.0.1, there are the options of "Advanced Prism Parameters". Amongst others, there are the "Auto reduction" and the "Blayer 2d". Does anyone has a clue, what these parameters are doing. The manual says nothing about them - only blank space (which is really poor by ANSYS to my mind ...).
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Getting prism to inflate into mixed tet-hex meshes Joe CFX 16 October 10, 2011 07:06
Prism layer in ICEMCFD shankar1221989 ANSYS Meshing & Geometry 1 January 8, 2011 16:03
can any one tell how to do split prism in icemcfd ashish agrahari Main CFD Forum 0 December 6, 2010 09:40
problem coming during prism creation in icemcfd ashish agrahari ANSYS 7 August 11, 2010 15:51
Icemcfd: Preventing prism inflation collisions? Joe CFX 1 July 31, 2007 09:13

All times are GMT -4. The time now is 07:35.