CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

return code 137 in cfx-solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 20, 2009, 09:36
Default return code 137 in cfx-solver
  #1
Andreas
Guest
 
Posts: n/a
Hello everyone,

I have a problem running the cfx-solver. The unstructured mesh is generated and checked in icemcfd - no problems reported. But when running the solver (in parallel mode) it will not start calculating but instead telling the following error code:

+--------------------------------------------------------------------+

An error has occurred in cfx5solve: The ANSYS CFX solver exited with return code 137. No results file has been created. +--------------------------------------------------------------------+

Unfortunately, there is no code reference in the CFX-manual, so I have no clue what that message is supposed to mean ... The partitioning works fine, according to the .out-file.

I am thankful for any help or ideas, Regards, Andy
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
thobois class engineTopoChangerMesh error Peter_600 OpenFOAM 4 August 2, 2014 10:52
[ICEM] trouble with mesh quality from ICEM in CFX Solver escher25 ANSYS Meshing & Geometry 0 February 28, 2011 08:38
ATTENTION! Reliability problems in CFX 5.7 Joseph CFX 14 April 20, 2010 16:45
Reynolds Number- CFX Solver Jwolf CFX 5 January 23, 2010 20:07
Return Code 15 from Solver Kramer CFX 3 May 25, 2005 19:40


All times are GMT -4. The time now is 22:36.