CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Urgent: 3D hollow pipe with small holes at faces (http://www.cfd-online.com/Forums/cfx/26971-urgent-3d-hollow-pipe-small-holes-faces.html)

ASHOK February 2, 2009 13:55

Urgent: 3D hollow pipe with small holes at faces
 
hi. i am making a geometry in ICEM such that.. a small hollow pipe of outer diameter 36 mm and inner diameter is 18 mm. i want to make 18 equidistance hole throughout its length. ithe length is 500 mm.

i have prepared hollow pipe, but i am confused how to prepare small holes at the faces, which should be time saving and easier method.

please reply as soon as possible.

thanks..

Glenn Horrocks February 2, 2009 18:58

Re: Urgent: 3D hollow pipe with small holes at fac
 
Hi,

Please do not use "urgent". If it is urgent then contact your CFX support, that is what you pay them for. Nobody is paid to answer questions here - we only do it because we enjoy helping people.

You question is a basic solid modelling and meshing question. Have you done the tutorials? Have you done a training course?

Glenn Horrocks

ashok February 3, 2009 02:14

Re: Urgent: 3D hollow pipe with small holes at fac
 
hello Glenn,

i didn't do any training course. sorry for this urgent word. i shouldnot use this..

would you please tell me, how to slove this problem? i will be very thankful.

cfdguy February 3, 2009 07:44

Re: 3D hollow pipe with small holes at faces
 
Don't you have a CAD program to do that for you and then export into an IGES file? Much faster and easier.

Or, just use DesignModeler instead.

Cheers!

Glenn Horrocks February 3, 2009 17:25

Re: Urgent: 3D hollow pipe with small holes at fac
 
Hi,

As I said (and cfdguy has also said), this seems like a basic solid modelling question. I suggest you do the tutorials provided with a solid modelling package and/or ANSYS and you should be able to work this out easily.

Glenn Horrocks


All times are GMT -4. The time now is 23:19.