CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Urgent: 3D hollow pipe with small holes at faces

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 2, 2009, 13:55
Default Urgent: 3D hollow pipe with small holes at faces
  #1
ASHOK
Guest
 
Posts: n/a
hi. i am making a geometry in ICEM such that.. a small hollow pipe of outer diameter 36 mm and inner diameter is 18 mm. i want to make 18 equidistance hole throughout its length. ithe length is 500 mm.

i have prepared hollow pipe, but i am confused how to prepare small holes at the faces, which should be time saving and easier method.

please reply as soon as possible.

thanks..
  Reply With Quote

Old   February 2, 2009, 18:58
Default Re: Urgent: 3D hollow pipe with small holes at fac
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

Please do not use "urgent". If it is urgent then contact your CFX support, that is what you pay them for. Nobody is paid to answer questions here - we only do it because we enjoy helping people.

You question is a basic solid modelling and meshing question. Have you done the tutorials? Have you done a training course?

Glenn Horrocks
  Reply With Quote

Old   February 3, 2009, 02:14
Default Re: Urgent: 3D hollow pipe with small holes at fac
  #3
ashok
Guest
 
Posts: n/a
hello Glenn,

i didn't do any training course. sorry for this urgent word. i shouldnot use this..

would you please tell me, how to slove this problem? i will be very thankful.
  Reply With Quote

Old   February 3, 2009, 07:44
Default Re: 3D hollow pipe with small holes at faces
  #4
cfdguy
Guest
 
Posts: n/a
Don't you have a CAD program to do that for you and then export into an IGES file? Much faster and easier.

Or, just use DesignModeler instead.

Cheers!
  Reply With Quote

Old   February 3, 2009, 17:25
Default Re: Urgent: 3D hollow pipe with small holes at fac
  #5
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

As I said (and cfdguy has also said), this seems like a basic solid modelling question. I suggest you do the tutorials provided with a solid modelling package and/or ANSYS and you should be able to work this out easily.

Glenn Horrocks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to model many small holes in a large domain? Bryan Woods FLUENT 3 February 5, 2009 20:34
Mesh errors in small faces Mark Arinov FLUENT 0 June 3, 2006 18:13
Terrible Mistake In Fluid Dynamics History Abhi Main CFD Forum 12 July 8, 2002 09:11
small size holes simulation brian ko Phoenics 5 October 22, 2001 12:53
fluid flow fundas ram Main CFD Forum 5 June 17, 2000 21:31


All times are GMT -4. The time now is 13:00.