CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   furnace (15m X 8M X 8M ) design in ansys workbench (https://www.cfd-online.com/Forums/cfx/26996-furnace-15m-x-8m-x-8m-design-ansys-workbench.html)

ram February 6, 2009 00:39

furnace (15m X 8M X 8M ) design in ansys workbench
 
Iam a beginner of Ansys cfx 11.0 .How to Develop a model of recovery furnace 15m X 8m X 8m in Ansys work bench .whether there is any difference in procedure to develop hollow and solid furnace.may pl help me out.My project is to simulate the black liquor droplet movement in the black liquor recovery furnace .

Glenn Horrocks February 8, 2009 19:45

Re: furnace (15m X 8M X 8M ) design in ansys workb
 
Hi,

That's a pretty tricky topic. My recommendation is to do lots of tutorials, then go to some training courses. You will need lots of background knowledge to do that sort of stuff.

Glenn Horrocks


All times are GMT -4. The time now is 07:59.