ansys ICEM CFD 11.0 tutorial needed
 

Hi,

Guys! I am learning using the Ansys meshing tool, ICEM CFD 11.0. I need the tutorial of the latest version. If some guys have it, would you please to share with me?

Thanks so much.

Jiuan

Re: ansys ICEM CFD 11.0 tutorial needed
 

Hi,

I think you can find them here: http://www.kxcad.net/ansys/ANSYS_ICE...rial/index.htm ( http://www.kxcad.net/ )

Re: ansys ICEM CFD 11.0 tutorial needed
 

Hi Rui,

Thanks so much.

Re: ansys ICEM CFD 11.0 tutorial needed
 

Another question: I want to get the step-by-step meshing tutorial of ICEM. But it seems that there is no such tutorial on this website. I still have trouble to figure out how to mesh the geometry using ICEM.

Re: ansys ICEM CFD 11.0 tutorial needed *NM*
 

Re: ansys ICEM CFD 11.0 tutorial needed
 

Hello. Please i want ICEM and CFX-Ansys CFD tutorial if exist. Thanks. My best regards. Alaa Hassan

anyone have video tutorials???
 

hi friends ...

can u help me in getting video tutorials of icem cfd and cfx ???

any site or place to get the dvds???

Yes, lots of tutorial videos are available. Have a look on the ANSYS community webpage http://www.ansys.com/customerportal/index.htm

thanks but need little more clarification
 

Hi...

Thanks for the link...
but it is asking login name and password which is related to licence number...
where can i get those information??????

how can i login or signup ?

Thanks
pratap

It has a link at the bottom to set up an account. Click there and off you go.

ANSYS Customer Portal
 

i am not able to enter the site .please anybody can provide me password and email id...



thank you...

See previous post - Click the link at the bottom to set up a new account.

There will be no distribution of logins and passwords discussed on this forum.

Need icem cfd 12.0.1 tutorial
 

hi
am new new to icem cfd ..can anybody help me to get icem cfd 12.0.1 tutorial .
thanks

Tutorials come with the ICEM installation, and additional tutorials are available on the ANSYS community page (The customer area from ansys.com)

steps on how to convert 2D geomtry to 3D geometry in ANSYS ICEM cfd
 

Hi Guys,
I am a beginner in CFD . I have created a 2D geometry in ICEM CFD and am about to create the 3 D geometry. Honestly I do not know how to start it. Is it possible to convert the 2D geometry to 3D geometry? if yes, please could some one explain the steps to convert the 2D to 3D geometry.
I lok forward to heaing from you guys.
Thanks
Izu

You take your 2D geometry and extrude or rotate it to create a 3D geometry. You can do this to both the geometry and the mesh in ICEM. Very simple.

thanks
 

Hi,
Thanks for your information

steps to extrude 2D geometry to 3D geometry
 

Hi,
I am so grateful for your response to my plight. One more thing, please could you break down the steps to extrude 2D geometry to 3D geometry.
Thanks in anticipation.
Izu

This is basic meshing operations. Have a look at the tutorial examples for your meshing software. If you are using ICEM they are available on the ANSYS community website.