2D simulations in CFX - PROBLEM

March 10, 2009, 15:38

Hello I am trying to do 2D simulation in CFX for fluid flow using Ansys Workbench. I create teh geometry and mesh it in Workbench. But when I export the 2D model CFX-Pre says that the geometry is not a valid 3D geometry. I have chosen 2D in the Project main tab; still the problem exists

Is there some default that I need to set?

Thank you

March 10, 2009, 16:07

To be honest, I don't know what you mean by chosing '2D in the Project main tab'. Anyway, if you're using CFX 11, you should follow the advice at:

http://www.cfd-online.com/Wiki/Ansys..._simulation.3F

http://www.cfd-online.com/Wiki/Ansys...tion_in_CFX.3F

Regards, andy2o

March 10, 2009, 16:53

Thank you!

I am new to CFX and excuse the lack of clarity in the question

Your answer has been very helpful

Regards CFX User

March 10, 2009, 15:38	2D simulations in CFX - PROBLEM	#1
CFX user Guest Posts: n/a	Hello I am trying to do 2D simulation in CFX for fluid flow using Ansys Workbench. I create teh geometry and mesh it in Workbench. But when I export the 2D model CFX-Pre says that the geometry is not a valid 3D geometry. I have chosen 2D in the Project main tab; still the problem exists Is there some default that I need to set? Thank you

March 10, 2009, 16:07	Re: 2D simulations in CFX - PROBLEM	#2
andy2o Guest Posts: n/a	To be honest, I don't know what you mean by chosing '2D in the Project main tab'. Anyway, if you're using CFX 11, you should follow the advice at: http://www.cfd-online.com/Wiki/Ansys..._simulation.3F http://www.cfd-online.com/Wiki/Ansys...tion_in_CFX.3F Regards, andy2o

March 10, 2009, 16:53	Re: 2D simulations in CFX - PROBLEM	#3
CFX user Guest Posts: n/a	Thank you! I am new to CFX and excuse the lack of clarity in the question Your answer has been very helpful Regards CFX User

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 07:38
Problem in coupling CFX and Ansys for fluid-thermal sim.	Jordi	CFX	21	March 1, 2017 05:03
CFX Casting problem: Can it be done all in one?	jfasl	CFX	1	September 14, 2010 03:14
problem in displaying surfaces in CFX	haho	CFX	1	July 5, 2009 19:25
CFX 11 x64 solver? problem	Attesz	CFX	6	June 7, 2009 08:37