CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   2D simulations in CFX - PROBLEM (http://www.cfd-online.com/Forums/cfx/27123-2d-simulations-cfx-problem.html)

CFX user March 10, 2009 16:38

2D simulations in CFX - PROBLEM
 
Hello I am trying to do 2D simulation in CFX for fluid flow using Ansys Workbench. I create teh geometry and mesh it in Workbench. But when I export the 2D model CFX-Pre says that the geometry is not a valid 3D geometry. I have chosen 2D in the Project main tab; still the problem exists

Is there some default that I need to set?

Thank you


andy2o March 10, 2009 17:07

Re: 2D simulations in CFX - PROBLEM
 
To be honest, I don't know what you mean by chosing '2D in the Project main tab'. Anyway, if you're using CFX 11, you should follow the advice at:

http://www.cfd-online.com/Wiki/Ansys..._simulation.3F

http://www.cfd-online.com/Wiki/Ansys...tion_in_CFX.3F

Regards, andy2o

CFX user March 10, 2009 17:53

Re: 2D simulations in CFX - PROBLEM
 
Thank you!

I am new to CFX and excuse the lack of clarity in the question

Your answer has been very helpful

Regards CFX User


All times are GMT -4. The time now is 01:24.