CFX Mesh from Pro-e

Simulation Engineer · March 16, 2009, 12:35

I am new to CFX and ANSYS. I am trying to generate a mesh from Pro-e geometry for use in CFX to perform analysis. Thus far - I have not found a method other that using iges from Pro-e for import into ANSYS - then writing the file for CFX using a .cdb file

Does anyone know of a better method? Perhaps using STEP file? I have access to ANYSYS Workbench, ANSYS, and ICEM as well as CFX.

Thanks in advance to all.

LKF · March 16, 2009, 14:16

I am not familiar with Pro-e, but if the option is available to save your model in parasolid format, you can import that directly into CFX-mesh.

Available for purchase from ANSYS is a bi-directional CAD connection as well. We're using that with SolidWorks and it works nicely.

cfdguy · March 17, 2009, 11:21

LKF is right.

Go for Parasolid or purchase the plugin instead (recommended).

Simulation Engineer · March 17, 2009, 20:22

Thanks for the tip about parasolid - I can create that format from Pro-e but do not see where you can import that directly into CFX. Could you tell me a bit more detail on the technique? Do you have to create a mesh in ANSYS - or am I missing something where the parasolid can be imported directly.

thanks again

LKF · March 18, 2009, 06:28

The parasolid file can be imported directly into CFX-mesh (or one of other Workbench mesh utilities). You still need to generate a mesh and then import either a .gtm or .cmdb (mesh file) into CFX-Pre.

March 16, 2009, 12:35	CFX Mesh from Pro-e	#1
Simulation Engineer New Member Join Date: Mar 2009 Posts: 4 Rep Power: 17	I am new to CFX and ANSYS. I am trying to generate a mesh from Pro-e geometry for use in CFX to perform analysis. Thus far - I have not found a method other that using iges from Pro-e for import into ANSYS - then writing the file for CFX using a .cdb file Does anyone know of a better method? Perhaps using STEP file? I have access to ANYSYS Workbench, ANSYS, and ICEM as well as CFX. Thanks in advance to all.

March 16, 2009, 14:16	Re: CFX Mesh from Pro-e	#2
LKF New Member Join Date: Mar 2009 Posts: 16 Rep Power: 17	I am not familiar with Pro-e, but if the option is available to save your model in parasolid format, you can import that directly into CFX-mesh. Available for purchase from ANSYS is a bi-directional CAD connection as well. We're using that with SolidWorks and it works nicely.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Create fine mesh that grows to coarse mesh (Urgent	CZ	FLUENT	1	January 3, 2009 10:36
Oscillatory mesh motion setup mesh flux ERROR	jaswi	OpenFOAM Running, Solving & CFD	5	August 23, 2007 04:41
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10
dynamic mesh - structured or cooper mesh	Manoj Kumar	FLUENT	2	November 11, 2005 01:18
How to convert STAR mesh into FLUENT mesh ?	Jihwan	Siemens	8	November 10, 2004 04:11

March 17, 2009, 11:21		#3
cfdguy New Member Join Date: Mar 2009 Location: Brazil Posts: 16 Rep Power: 17	LKF is right. Go for Parasolid or purchase the plugin instead (recommended).

March 17, 2009, 20:22		#4
Simulation Engineer New Member Join Date: Mar 2009 Posts: 4 Rep Power: 17	Thanks for the tip about parasolid - I can create that format from Pro-e but do not see where you can import that directly into CFX. Could you tell me a bit more detail on the technique? Do you have to create a mesh in ANSYS - or am I missing something where the parasolid can be imported directly. thanks again

March 18, 2009, 06:28		#5
LKF New Member Join Date: Mar 2009 Posts: 16 Rep Power: 17	The parasolid file can be imported directly into CFX-mesh (or one of other Workbench mesh utilities). You still need to generate a mesh and then import either a .gtm or .cmdb (mesh file) into CFX-Pre.