2D mesh in "gtm" format

siavash · July 7, 2009, 08:54

Hello every one,
for 3D geometries(solid body) we can generate mesh in "gtm" format. but wen i create a 2D geometry(surface body) and generate 2D mesh i can't do it. is it possible to generate mesh in "gtm" format for surface body and use it for simulation?
Regards,
s.Ghassemi.

John · July 7, 2009, 11:05

CFX only allows 3d mesh. So even your problem is 2d, you sill need to generate a 3d by having one layer mesh on third direction

ghorrocks · July 7, 2009, 19:33

http://www.cfd-online.com/Wiki/Ansys..._simulation.3F

siavash · July 9, 2009, 04:04

thanks for your answer.

siavash · July 9, 2009, 04:10

thanks for your answer.

rogbrito · July 14, 2009, 08:08

How about this mesh?

http://www.4shared.com/file/11759512...rito_2009.html

I used 100.0 mm for z-direction in a cubic of 1,000.0 mm.

Rogerio.

siavash · July 16, 2009, 12:39

thanks for your answer.

rogbrito · July 16, 2009, 18:04

You´re welcome, Sir!

Quote:

Originally Posted by siavash

thanks for your answer.

July 7, 2009, 08:54	2D mesh in "gtm" format	#1
siavash New Member siavash ghassemi Join Date: Jul 2009 Posts: 11 Rep Power: 16	Hello every one, for 3D geometries(solid body) we can generate mesh in "gtm" format. but wen i create a 2D geometry(surface body) and generate 2D mesh i can't do it. is it possible to generate mesh in "gtm" format for surface body and use it for simulation? Regards, s.Ghassemi.

July 14, 2009, 08:08	How about this mesh?	#6
rogbrito Senior Member Jack Join Date: Mar 2009 Posts: 106 Rep Power: 16	How about this mesh? http://www.4shared.com/file/11759512...rito_2009.html I used 100.0 mm for z-direction in a cubic of 1,000.0 mm. Rogerio.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Polytopochanger broken in 15x due to mesh format change	andersking	OpenFOAM Bugs	6	January 19, 2009 04:34
Bug in layerAdditionRemoval change to OF15 mesh format	andersking	OpenFOAM Bugs	2	August 6, 2008 04:17
Format of PEN file for 3D mesh	Abhishek Basak	Phoenics	0	July 5, 2007 00:54
Multizone unstructerd mesh frm icem in cgns format	Michael	CFX	0	October 13, 2006 03:30
Can Numeca mesh export to other format?	Andy Cong	Fidelity CFD	1	April 4, 2006 06:18

July 7, 2009, 11:05		#2
John Member Join Date: Mar 2009 Posts: 49 Rep Power: 17	CFX only allows 3d mesh. So even your problem is 2d, you sill need to generate a 3d by having one layer mesh on third direction

July 7, 2009, 19:33		#3
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	http://www.cfd-online.com/Wiki/Ansys..._simulation.3F

July 9, 2009, 04:04		#4
siavash New Member siavash ghassemi Join Date: Jul 2009 Posts: 11 Rep Power: 16	thanks for your answer.

July 9, 2009, 04:10		#5
siavash New Member siavash ghassemi Join Date: Jul 2009 Posts: 11 Rep Power: 16	thanks for your answer.

July 16, 2009, 12:39		#7
siavash New Member siavash ghassemi Join Date: Jul 2009 Posts: 11 Rep Power: 16	thanks for your answer.