CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Arbitary Surface in CFX Postprocessor

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 29, 2009, 08:33
Arrow Arbitary Surface in CFX Postprocessor
  #1
New Member
 
Join Date: May 2009
Posts: 1
Rep Power: 0
MiXaNiK is on a distinguished road
Hello all!
I've solved the problem and moved to postprocessing. But my model's geometry is very complicated and it'll take me considerable time to make all cuts of places of interest with CFX-post's embedded tools. As I know, the model's mesh should be only volume mesh i.e. CFX-Pre cannot recognize any surface mesh. That is why, as I know, the only way to have previously prepared cut of a geometry (surface mesh, for instance, in *.msh ) is using User Surfaces in CFX-Post. Am I right?
However User Surface require *.cdb or *.xml file format to use this feature. I wonder how can I get that files? I've looked for some information on various sites, but found nothing useful. As well I've checked ICEM and CFX Mesher, but there were also nothing.
Can anybody give me a hand with this trouble?
MiXaNiK is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error during get surface loads! in cfx cfxuser1 CFX 0 March 25, 2009 17:01
CFX 5.6 the surface overlape itself Neser CFX 0 December 20, 2004 12:13
Can we simulate 3D free surface with CFX? Alan CFX 7 June 5, 2003 12:19
CFX 4.4 New free surface option Michael Rasmussen CFX 3 October 5, 2001 13:24
CFX 5.5 Roued CFX 1 October 2, 2001 16:49


All times are GMT -4. The time now is 04:10.