Initial field from res file by "node to node" reading

Nevel · June 16, 2009, 05:13

Hi all!
I want to read initial condition from res file to new grid (some walls slightly moved). Simple interpolation isn't good for me. It would be more correct if the data can be read by the "node to node" way.
Is it possible? Can you advise something?
Thanks for responses!

ghorrocks · June 16, 2009, 07:59

Hi,

If you want node by node reading and setting of initial conditions then you need user fortran.

You may also be able to do it by exporting data from CFX-Post, then doing whatever transformation you like on them and then reading them back into CFX-Pre as a 3D cloud of points. This should work as long as your mesh is not too big.

Glenn Horrocks

June 16, 2009, 05:13	Initial field from res file by "node to node" reading	#1
Nevel New Member Join Date: May 2009 Posts: 8 Rep Power: 16	Hi all! I want to read initial condition from res file to new grid (some walls slightly moved). Simple interpolation isn't good for me. It would be more correct if the data can be read by the "node to node" way. Is it possible? Can you advise something? Thanks for responses!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh	gschaider	OpenFOAM Community Contributions	300	October 29, 2014 18:00
How to write k and epsilon before the abnormal end	xiuying	OpenFOAM Running, Solving & CFD	8	August 27, 2013 15:33
Low Mach number Compressible jet flow using LES	ankgupta8um	OpenFOAM Running, Solving & CFD	7	January 15, 2011 13:38
Computational time	sunnysun	OpenFOAM Running, Solving & CFD	5	March 16, 2009 03:32
Modeling in micron scale using icoFoam	m9819348	OpenFOAM Running, Solving & CFD	7	October 27, 2007 00:36

June 16, 2009, 07:59		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,701 Rep Power: 143	Hi, If you want node by node reading and setting of initial conditions then you need user fortran. You may also be able to do it by exporting data from CFX-Post, then doing whatever transformation you like on them and then reading them back into CFX-Pre as a 3D cloud of points. This should work as long as your mesh is not too big. Glenn Horrocks