lagoon

vass · July 2, 2009, 15:12

Hello, I am beginner in CFX, and must simulate a lagoon for treatment, and that this will need to have an initial height of the fluid, must begin the simulation with permanent flow and also add a tracer. If someone can explain to me how can I do that I would be immensely grateful.

Rui · July 2, 2009, 15:54

What CFX Tutorials have you done so far?

vass · July 2, 2009, 23:20

Quote:

Originally Posted by vass

Hello, I am beginner in CFX, and must simulate a lagoon for treatment, and that this will need to have an initial height of the fluid, must begin the simulation with permanent flow and also add a tracer. If someone can explain to me how can I do that I would be immensely grateful.

Will someone be able to help me this problem?
Now appreciate the commitment to do so.

Rui · July 3, 2009, 03:43

still,

Quote:

Originally Posted by Rui

What CFX Tutorials have you done so far?

... ah, and have a look at http://www.cfd-online.com/Wiki/Ansys_FAQ#How_should_I_ask_my_question_on_the_CFX_ forum_to_get_the_best_possible_answer.3F, specially at "Dont ask over broad questions e.g. "How do I simulate a 4-stroke engine". Nobody is going to type out fifty pages of guidance. They have better things to do"

vass · July 3, 2009, 07:56

Somebody could help me in at least one of the problems.
Thank the efforts of those who at least try to help me.

ghorrocks · July 5, 2009, 06:36

Hi,

Do the free surface flow over a bump tutorial as it covers free surface flows and setting initial conditions. The tracer will probably be modelled as a passive scalar, or in CFX talk an "additional variable". By permanent flow I assume you mean the water is flowing through the thing - well, that's why you are doing a CFD analysis.

Glenn Horrocks

vass · July 5, 2009, 08:49

Thank you Glenn Horrocks.

July 2, 2009, 15:12	lagoon	#1
vass New Member Vinicius Alexandre Sikora de Souza Join Date: Jul 2009 Posts: 7 Rep Power: 16	Hello, I am beginner in CFX, and must simulate a lagoon for treatment, and that this will need to have an initial height of the fluid, must begin the simulation with permanent flow and also add a tracer. If someone can explain to me how can I do that I would be immensely grateful.

July 2, 2009, 15:54		#2
Rui Member Rui Igreja Join Date: Mar 2009 Location: Aveiro Posts: 68 Blog Entries: 1 Rep Power: 17	What CFX Tutorials have you done so far? __________________ Rui

July 3, 2009, 07:56		#5
vass New Member Vinicius Alexandre Sikora de Souza Join Date: Jul 2009 Posts: 7 Rep Power: 16	Somebody could help me in at least one of the problems. Thank the efforts of those who at least try to help me.

July 5, 2009, 06:36		#6
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Hi, Do the free surface flow over a bump tutorial as it covers free surface flows and setting initial conditions. The tracer will probably be modelled as a passive scalar, or in CFX talk an "additional variable". By permanent flow I assume you mean the water is flowing through the thing - well, that's why you are doing a CFD analysis. Glenn Horrocks

July 5, 2009, 08:49		#7
vass New Member Vinicius Alexandre Sikora de Souza Join Date: Jul 2009 Posts: 7 Rep Power: 16	Thank you Glenn Horrocks.