CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

initial file for fsi modeling?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 21, 2009, 03:06
Default initial file for fsi modeling?
  #1
Member
 
SMN
Join Date: Jun 2009
Location: CANADA
Posts: 71
Rep Power: 16
mortazavi is on a distinguished road
hi:
i want to run a fsi model...this error appears in ansys out file and the run stops in the first itterations:"one or more element become highly distorted...."
now i want to change the initial condition in cfx to solve this problem...i decided to solve a transient rigid model and put the results as the initial file .res for the fsi model...but for adjusting the time i encounter a problem...i mean the rigid model starts at t=0 and ends at the time .82 which is the total time(pulse period) for fsi model.if i set the total time for fsi model as 1.64 and the coupling initial time =.82 then this warninig appears:
"The simulation time value obtained from the CFX input file is inconsistent with the Coupling Initial Time value used for this simulation. Please review results carefully.
CFX input file time : 8.2-01
Coupling Initial Time : 0.0000E+00
what can i do and is this a useful wal to solve the fsi problem?
regards
mortazavi is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[blockMesh] BlockMesh FOAM warning gaottino OpenFOAM Meshing & Mesh Conversion 7 July 19, 2010 15:11
[OpenFOAM] ParaView 33 canbt open OpenFoam file hariya03 ParaView 7 September 25, 2008 18:33
Compiling OpenFOAM13 on AMD64 with Redhat Enterprise mbeaudoin OpenFOAM Installation 20 June 17, 2008 07:43
DxFoam reader update hjasak OpenFOAM Post-Processing 69 April 24, 2008 02:24
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 19:07


All times are GMT -4. The time now is 14:15.