Error interpolating results onto the new mesh
I got this error when an result file was used as intitial values file. Can anybody help me figure it out? THanks a lot
Details of error:- Details of error:- ---------------- ---------------- Error detected by routine MAKDAT Error detected by routine MAKDAT CDANAM = BBMID CDTYPE = REAL ISIZE = 7651833 CDANAM = BBMID CDTYPE = REAL ISIZE = 7651833 CRESLT = FULL CRESLT = FULL Current Directory : /INTERP/OLD1/MESH/TSTEP0/CLOOP0/ZN1/ELEMENT_TREE Current Directory : /INTERP/OLD1/MESH/TSTEP0/CLOOP0/ZN1/ELEMENT_TREE +================================================= ===================+ | ****** PROBLEM REPORT ****** | |--------------------------------------------------------------------| | Subsystem: Input | | Subroutine name: ErrAction | | Severity level: Fatal Error | | Error message number: 001100279 | |--------------------------------------------------------------------| | Message: | | | | Stopped in routine MEMERR | | | | | | | | | | | +================================================= ===================+ +--------------------------------------------------------------------+ | An error has occurred in cfx5solve: | | | | Error interpolating results onto the new mesh: | | /usr/ansys_inc/v110/CFX/bin/linux-amd64//solver-pvm.exe exited | | with return code 1. | +--------------------------------------------------------------------+ |
My guess is you have run out of memory. Try it on a machine with more memory, or look at the interpolator memory settings in the documentation to use less memory.
|
Yes. It works now!
Thanks ghorrocks~~ Quote:
|
Similar kind of error
Error interpolating results onto the new mesh: C:\Program |
| Files\ANSYS Inc\v145\CFX\bin\winnt\solver-pcmpi.exe exited with | | return code 1 But this doesnt work when I run it on a machine with higher memory.. |
Hello,
I have the same problem. I don't know how the memory would be a problem since I am running the simulation on: Intel i7-4770, 3.4GHz and 16GB RAM Any ideas? |
By the way, I have this error as well:
Details of error:- ---------------- Error detected by routine MAKDAT Illegal data area length CDANAM = NTOTALS_EST CDTYPE = INTR ISIZE = 0 CRESLT = SIZE Current Directory : /INTERP/NEW/NAMEMAP Could it be that the problem is with the number of nodes? I have an Academic License and around 2M nodes. I guess that the limit is 512K |
hey i have the same problem plz help? is memory is the issue?
:confused::confused::confused::confused::confused: Quote:
|
Error: exited with return code1
I am facing this problem while I am simulating water flow of turbine. Can anyone help me? Error interpolating results onto the new mesh: C:\Program Files\ANSYS
Inc\v162\CFX\bin\winnt-amd64\double\solver-pcmpi.exe exited with return code 1. |
The most likely cause is you have run out of memory. If that is not the case then give more details on what you are doing.
|
same error happens to me:
Error interpolating results onto the new mesh: D:\ANSYS Inc\v182\CFX\bin\winnt-amd64\solver-mpi.exe exited with return code 1. I am trying to use DOE and Response Surface Optimisation, and all DPs fail with same error. I am running the solver using RSM. Is it a mesh interpolation memory issue? Many thanks |
It could be that you are running out of memory. You would have to provide more details of what you are doing before we could help more.
|
Ghorrocks, I am running an optimisation case, using CFX and Workbench.
Everything goes well when I run (local) the initial case to generate the required output condition for the optimisation. When i then add the Response Surface Optimisation module and run the generated DP cases using RSM, everything fails. I believe the problem is the Solver looking for the IBM MPI Distributed Parallel instead of the Intel MPI Distributed Parallel, but that may just be a secondary problem. any similar experience anybody? |
Solution found to this.
Problem was indeed the required Catalogue Size around 3.5K during the interpolation phase of the solver. Execution Control > Interpolator >Interpolator Memory > Catalogue Size > 4x This fixed it in my case, calculation now running smoothly Thanks :) |
hey!!
i am also facing the same problem of "interpolating onto new mesh" while solving for an impeller model. And have tried all those which others have suggested to,but still stuck with the same error. please helpp!! |
Have a look in the documentation about the initial conditions interpolation routine. It has a few memory settings available, so adjusting some of those settings might help.
|
Ok thank you!!
Will try this out:) |
Can I couple the data of CFX analysis done on one impeller model to the stress analysis done on a another impeller model similar to it but is dimensionally slightly different?
|
It will map the forces (from pressure and wall shear) onto the surface for the FEA, so the surface will have to match good enough for the mapping/interpolation to work.
|
Okay thank you:)
|
What exactly is interpolating results on mesh?
Can tell me brief..:) |
All times are GMT -4. The time now is 08:57. |