CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Error interpolating results onto the new mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 24, 2009, 22:18
Default Error interpolating results onto the new mesh
  #1
Member
 
^_^
Join Date: Mar 2009
Posts: 36
Rep Power: 17
Jasmine is on a distinguished road
I got this error when an result file was used as intitial values file. Can anybody help me figure it out? THanks a lot
Details of error:-
Details of error:-
----------------
----------------
Error detected by routine MAKDAT
Error detected by routine MAKDAT
CDANAM = BBMID CDTYPE = REAL ISIZE = 7651833
CDANAM = BBMID CDTYPE = REAL ISIZE = 7651833
CRESLT = FULL
CRESLT = FULL


Current Directory : /INTERP/OLD1/MESH/TSTEP0/CLOOP0/ZN1/ELEMENT_TREE
Current Directory : /INTERP/OLD1/MESH/TSTEP0/CLOOP0/ZN1/ELEMENT_TREE

+================================================= ===================+
| ****** PROBLEM REPORT ****** |
|--------------------------------------------------------------------|
| Subsystem: Input |
| Subroutine name: ErrAction |
| Severity level: Fatal Error |
| Error message number: 001100279 |
|--------------------------------------------------------------------|
| Message: |
| |
| Stopped in routine MEMERR |
| |
| |
| |
| |
| |
+================================================= ===================+

+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| Error interpolating results onto the new mesh: |
| /usr/ansys_inc/v110/CFX/bin/linux-amd64//solver-pvm.exe exited |
| with return code 1. |
+--------------------------------------------------------------------+
Jasmine is offline   Reply With Quote

Old   September 25, 2009, 07:53
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,655
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
My guess is you have run out of memory. Try it on a machine with more memory, or look at the interpolator memory settings in the documentation to use less memory.
ghorrocks is offline   Reply With Quote

Old   September 25, 2009, 14:23
Default
  #3
Member
 
^_^
Join Date: Mar 2009
Posts: 36
Rep Power: 17
Jasmine is on a distinguished road
Yes. It works now!
Thanks ghorrocks~~

Quote:
Originally Posted by ghorrocks View Post
My guess is you have run out of memory. Try it on a machine with more memory, or look at the interpolator memory settings in the documentation to use less memory.
Jasmine is offline   Reply With Quote

Old   May 26, 2014, 01:48
Default Similar kind of error
  #4
New Member
 
george
Join Date: May 2014
Posts: 3
Rep Power: 11
gorge is on a distinguished road
Error interpolating results onto the new mesh: C:\Program |
| Files\ANSYS Inc\v145\CFX\bin\winnt\solver-pcmpi.exe exited with |
| return code 1


But this doesnt work when I run it on a machine with higher memory..
gorge is offline   Reply With Quote

Old   April 1, 2015, 04:25
Default
  #5
New Member
 
Join Date: Mar 2015
Posts: 16
Rep Power: 11
MarkoP is on a distinguished road
Hello,

I have the same problem. I don't know how the memory would be a problem since I am running the simulation on:

Intel i7-4770, 3.4GHz and 16GB RAM

Any ideas?
MarkoP is offline   Reply With Quote

Old   April 1, 2015, 04:54
Default
  #6
New Member
 
Join Date: Mar 2015
Posts: 16
Rep Power: 11
MarkoP is on a distinguished road
By the way, I have this error as well:

Details of error:-
----------------
Error detected by routine MAKDAT
Illegal data area length CDANAM = NTOTALS_EST CDTYPE = INTR ISIZE = 0
CRESLT = SIZE

Current Directory : /INTERP/NEW/NAMEMAP

Could it be that the problem is with the number of nodes? I have an Academic License and around 2M nodes. I guess that the limit is 512K
MarkoP is offline   Reply With Quote

Old   May 2, 2017, 16:01
Default
  #7
New Member
 
Azeez Ali
Join Date: May 2017
Posts: 1
Rep Power: 0
azeezjabbar is on a distinguished road
hey i have the same problem plz help? is memory is the issue?
Quote:
Originally Posted by Jasmine View Post
Yes. It works now!
Thanks ghorrocks~~
azeezjabbar is offline   Reply With Quote

Old   November 18, 2017, 00:54
Default Error: exited with return code1
  #8
New Member
 
Kaythi
Join Date: Nov 2017
Posts: 1
Rep Power: 0
Kaythi is on a distinguished road
I am facing this problem while I am simulating water flow of turbine. Can anyone help me? Error interpolating results onto the new mesh: C:\Program Files\ANSYS
Inc\v162\CFX\bin\winnt-amd64\double\solver-pcmpi.exe exited with return
code 1.
Kaythi is offline   Reply With Quote

Old   November 18, 2017, 06:17
Default
  #9
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,655
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
The most likely cause is you have run out of memory. If that is not the case then give more details on what you are doing.
ghorrocks is offline   Reply With Quote

Old   July 7, 2018, 14:07
Default
  #10
New Member
 
Enrico Crobu
Join Date: Jun 2013
Location: UK
Posts: 3
Rep Power: 12
EnricoCrobu is on a distinguished road
same error happens to me:

Error interpolating results onto the new mesh: D:\ANSYS
Inc\v182\CFX\bin\winnt-amd64\solver-mpi.exe exited with return code 1.

I am trying to use DOE and Response Surface Optimisation, and all DPs fail with same error.

I am running the solver using RSM.
Is it a mesh interpolation memory issue?

Many thanks
EnricoCrobu is offline   Reply With Quote

Old   July 8, 2018, 07:40
Default
  #11
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,655
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
It could be that you are running out of memory. You would have to provide more details of what you are doing before we could help more.
EnricoCrobu likes this.
__________________
Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.
ghorrocks is offline   Reply With Quote

Old   July 9, 2018, 16:04
Default
  #12
New Member
 
Enrico Crobu
Join Date: Jun 2013
Location: UK
Posts: 3
Rep Power: 12
EnricoCrobu is on a distinguished road
Ghorrocks, I am running an optimisation case, using CFX and Workbench.

Everything goes well when I run (local) the initial case to generate the required output condition for the optimisation.
When i then add the Response Surface Optimisation module and run the generated DP cases using RSM, everything fails.

I believe the problem is the Solver looking for the IBM MPI Distributed Parallel instead of the Intel MPI Distributed Parallel, but that may just be a secondary problem.

any similar experience anybody?
EnricoCrobu is offline   Reply With Quote

Old   August 7, 2018, 13:14
Default
  #13
New Member
 
Enrico Crobu
Join Date: Jun 2013
Location: UK
Posts: 3
Rep Power: 12
EnricoCrobu is on a distinguished road
Solution found to this.
Problem was indeed the required Catalogue Size around 3.5K during the interpolation phase of the solver.

Execution Control > Interpolator >Interpolator Memory > Catalogue Size > 4x

This fixed it in my case, calculation now running smoothly

Thanks
EnricoCrobu is offline   Reply With Quote

Old   November 12, 2018, 13:02
Default
  #14
New Member
 
sadhana m bhat
Join Date: Nov 2018
Posts: 7
Rep Power: 7
Sadhana m bhat is on a distinguished road
hey!!
i am also facing the same problem of "interpolating onto new mesh" while solving for an impeller model.

And have tried all those which others have suggested to,but still stuck with the same error.

please helpp!!
Sadhana m bhat is offline   Reply With Quote

Old   November 12, 2018, 16:53
Default
  #15
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,655
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
Have a look in the documentation about the initial conditions interpolation routine. It has a few memory settings available, so adjusting some of those settings might help.
__________________
Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.
ghorrocks is offline   Reply With Quote

Old   November 12, 2018, 20:50
Default
  #16
New Member
 
sadhana m bhat
Join Date: Nov 2018
Posts: 7
Rep Power: 7
Sadhana m bhat is on a distinguished road
Ok thank you!!
Will try this out
Sadhana m bhat is offline   Reply With Quote

Old   November 15, 2018, 01:21
Default
  #17
New Member
 
sadhana m bhat
Join Date: Nov 2018
Posts: 7
Rep Power: 7
Sadhana m bhat is on a distinguished road
Can I couple the data of CFX analysis done on one impeller model to the stress analysis done on a another impeller model similar to it but is dimensionally slightly different?
Sadhana m bhat is offline   Reply With Quote

Old   November 15, 2018, 01:24
Default
  #18
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,655
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
It will map the forces (from pressure and wall shear) onto the surface for the FEA, so the surface will have to match good enough for the mapping/interpolation to work.
__________________
Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.
ghorrocks is offline   Reply With Quote

Old   November 15, 2018, 01:29
Default
  #19
New Member
 
sadhana m bhat
Join Date: Nov 2018
Posts: 7
Rep Power: 7
Sadhana m bhat is on a distinguished road
Okay thank you
Sadhana m bhat is offline   Reply With Quote

Old   November 15, 2018, 01:30
Default
  #20
New Member
 
sadhana m bhat
Join Date: Nov 2018
Posts: 7
Rep Power: 7
Sadhana m bhat is on a distinguished road
What exactly is interpolating results on mesh?
Can tell me brief..
Sadhana m bhat is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
why dynamic mesh method give wrong results? weiyang1980 Main CFD Forum 0 September 22, 2009 22:06
[OpenFOAM] 'integrate variables' filter on a polyhedral mesh gives wrong results... jbf ParaView 0 September 4, 2009 05:08
Restart Deforming Mesh Calculation Tristan CFX 0 June 22, 2009 19:34
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Mesh Refinement JY Siemens 7 September 19, 2002 14:37


All times are GMT -4. The time now is 00:36.