 |
 |
 |
|
|
|
[Sponsors] | ||||
October 8, 2009, 08:21
|
Boundary Conditions for BLUNTBODY TUTORIAL
|
#1 |
|
New Member
Rakesh
Join Date: Oct 2009
Posts: 3
Rep Power: 16  |
hi,
I am new to CFX, currently I am working for my project on flow simulation between fins of a automotive heat exchanger. I found BLUNTBODY tutorial is helpful for me and I tried to do it. But at giving boundary contions I couldnt get the option for inlet and outlet at Location. It is just showing me Body or BLUNTBODY or SOLID1_1. can any one please help me out. thanking you. |
|
|
|
|
|
October 8, 2009, 12:46
|
|
#2 | |
|
Senior Member
Jack
Join Date: Mar 2009
Posts: 106
Rep Power: 16 |
Hi,
take a little while to study more about ANSYS CFX software, give a look on these files (Tutorial 17): http://www.4shared.com/file/72198900...tionpart1.html http://www.4shared.com/file/72199871...tionpart2.html  Quote:
|
||
|
|
|
||
|
October 8, 2009, 17:19
|
|
#3 |
|
New Member
Rakesh
Join Date: Oct 2009
Posts: 3
Rep Power: 16 |
thanks for your help BRITO
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Impinging Jet Boundary Conditions | Anindya | Main CFD Forum | 25 | February 27, 2016 12:58 |
| Problems with boundary conditions for a lowRekOmegaSST turbulence model | cfdmarkus | OpenFOAM Running, Solving & CFD | 16 | November 14, 2011 04:44 |
| Boundary conditions for turbulent boundary layer | Thomas | FLUENT | 1 | June 17, 2008 05:14 |
| Pressure boundary conditions | Lionel S. | Main CFD Forum | 1 | August 24, 2007 18:03 |
| A problem about setting boundary conditions | lyang | Main CFD Forum | 0 | September 19, 1999 18:29 |
Linear Mode
