Pressure on mesh nodes data

mattyg88 · November 30, 2009, 11:54

Good afternoon,

I am a 3rd year MEng civil engineering student from the uk. I am currently working on my 30 credit project which is to design a contact mixing tank for wastewater treatment works.
The first part of my project is to generate the mesh of the tank and run a cfx simulation to determine the pressures on the walls of my mesh.
I have generated my geometry and mesh for the tank in ansys workbench, inputted the boundry and flow conditions in cfx -pre and ran it in cfx-solver. I have been told by my supervisor that my aim is to generate a text file with all the nodes of my mesh and the corresponding pressures acting on each node. I am finding it hard however to complete this final part and determine in cfx-post the pressures on each node of my mesh in a text file.

Any help would be gratefully appreciated, thanks for your time

matt

ckleanth · November 30, 2009, 13:06

If I were you I'd explore the export facility in post.

mattyg88 · December 1, 2009, 08:45

many thanks

November 30, 2009, 11:54	Pressure on mesh nodes data	#1
mattyg88 New Member Matt Join Date: Oct 2009 Posts: 7 Rep Power: 16	Good afternoon, I am a 3rd year MEng civil engineering student from the uk. I am currently working on my 30 credit project which is to design a contact mixing tank for wastewater treatment works. The first part of my project is to generate the mesh of the tank and run a cfx simulation to determine the pressures on the walls of my mesh. I have generated my geometry and mesh for the tank in ansys workbench, inputted the boundry and flow conditions in cfx -pre and ran it in cfx-solver. I have been told by my supervisor that my aim is to generate a text file with all the nodes of my mesh and the corresponding pressures acting on each node. I am finding it hard however to complete this final part and determine in cfx-post the pressures on each node of my mesh in a text file. Any help would be gratefully appreciated, thanks for your time matt

November 30, 2009, 13:06		#2
ckleanth Senior Member George Join Date: Mar 2009 Location: Birmingham, UK Posts: 257 Rep Power: 18	If I were you I'd explore the export facility in post. __________________ Top 4 tips 1. Knowledge is everything and Ignorance is dangerous. 2. Understand your limitations and try to eliminate them. 3. Get yerself a bike and hoon the chuffer. You will soon learn why dogs like to hang their heads out the car window. 4. Please before asking any questions on how to run simulations in CFX, go though all the tutorials

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 04:24
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM	kawamatt2	ANSYS Meshing & Geometry	17	December 20, 2011 11:45
Convergence moving mesh	lr103476	OpenFOAM Running, Solving & CFD	30	November 19, 2007 14:09
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 09:38
Hydrostatic pressure in 2-phase flow modeling (CFX4.2)	HB &DS	CFX	0	January 9, 2000 13:19

December 1, 2009, 08:45		#3
mattyg88 New Member Matt Join Date: Oct 2009 Posts: 7 Rep Power: 16	many thanks