CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   FSI error ERROR #001100279(Shell & Tube heat exchanger) (http://www.cfd-online.com/Forums/cfx/74190-fsi-error-error-001100279-shell-tube-heat-exchanger.html)

Chandrashekhar March 26, 2010 02:46

FSI error ERROR #001100279(Shell & Tube heat exchanger)
 
DEAR all

I have to solve the problem FSI Modelling Shell & Tube Heat Exchanger (Determine Tubes Vibration) using CFX. I have done the meshing of Tubes & baffles in Transient Mechanical part & Meshing of whole domain (shell, tubes ,baffles) in CFX, defined 2 domains (1) shell side fluid with baffles (2) tube side fluid ,mesh motion to be transfered from ansys to CFX. but at the end, when I start CFX solver, I recieve this error message.



Error detected by routine MAKDAT
Error detected by routine MAKDAT
CDANAM = IZN CDTYPE = INTR ISIZE = 1
CDANAM = IZN CDTYPE = INTR ISIZE = 1
CRESLT = OLD
CRESLT = OLD


****** PROBLEM REPORT ******
|--------------------------------------------------------------------
| Subsystem: Input
| Subroutine name: ErrAction
| Severity level: Fatal Error
| Error message number: 001100279
|--------------------------------------------------------------------
| Message:
|
| Stopped in routine MEMERR



can anybody please help me with this error & exactly what BC i should apply for the problem ?

ghorrocks March 26, 2010 06:07

Have you run out of memory?

Chandrashekhar March 26, 2010 13:26

RAM is 4 GB
 
my laptop's RAM is 4 GB,dual core processor.could it be the problem?

ghorrocks March 26, 2010 16:04

Start the job up and watch the task manager. Don't forget if are using a Windows 32 bit OS your limit is 2GB, not 4GB.


All times are GMT -4. The time now is 11:41.