CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Export Heat Flux CFX -> ANSYS Workbench (http://www.cfd-online.com/Forums/cfx/74885-export-heat-flux-cfx-ansys-workbench.html)

Freeman April 10, 2010 17:29

Export Heat Flux CFX -> ANSYS Workbench
 
Hi CFD-users,

These days I am performing some thermal simulations with Ansys workbench and I would need to import to workbench some heat fluxes from a previous calculation done with CFX (as boundary conditions for workbench).

I tried to use this feaature of CFX of ANSYS Import load surface, but I donīt know how to import the resulting sfe or xml file exported with CFX into workbench.

Could anybody shred me some light to this?

Many thanks in advance

mactech001 April 11, 2010 01:31

tried the feature in WB where it allows to import CFX Temperature, CFX Convection?

Freeman April 11, 2010 08:24

Quote:

Originally Posted by mactech001 (Post 254130)
tried the feature in WB where it allows to import CFX Temperature, CFX Convection?

Thanks for your reply mactech001,

Temperature and convection are enhabled and I could set these boundary conditions, but in the same drop down menu, heat flux is disabled, which is the one I need; do you know the reason why I can only set temperature and convection but not heat flux and others?

Thanks again


All times are GMT -4. The time now is 11:32.