Heat Flux as a Profile Boundary Condition

Hitch8 · April 22, 2010, 04:20

Hi Everyone!

Does someone know how to set a heat flux as a profile boundary condition?
I have a heat flux profile in the correct csv format (x[m], y[m], z[m], Heat Flux [W m^-2]) and I want to use this profile as a boundary condition at a wall. I've initialized the data under Tools -> Initialise Profile Data, that worked out well. CFX has now the cordinates (x,y,z) and the Heat Flux. In the next step I want to use the profile data to specify the boundary condition at a certain wall. In Basic Settings I select "Use Profile Data" and the initialized file appears. But then nothing happens.... Does someone know how to proceed??? That would help me alot!

Philipp

ghorrocks · April 22, 2010, 07:27

My guess (and it is only a guess) is that the profile data only supports velocity. Have you tried a 3D CEL interpolation cloud function? I think that should work in this case.

Hitch8 · April 22, 2010, 13:09

Thank you very much for your answer, I found out how it works. You have to specify the variable under user defined functions, and then it works.

April 22, 2010, 04:20	Heat Flux as a Profile Boundary Condition	#1
Hitch8 New Member Philipp Join Date: Apr 2010 Posts: 27 Rep Power: 16	Hi Everyone! Does someone know how to set a heat flux as a profile boundary condition? I have a heat flux profile in the correct csv format (x[m], y[m], z[m], Heat Flux [W m^-2]) and I want to use this profile as a boundary condition at a wall. I've initialized the data under Tools -> Initialise Profile Data, that worked out well. CFX has now the cordinates (x,y,z) and the Heat Flux. In the next step I want to use the profile data to specify the boundary condition at a certain wall. In Basic Settings I select "Use Profile Data" and the initialized file appears. But then nothing happens.... Does someone know how to proceed??? That would help me alot! Philipp

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wall with fixed heatFlux boundary condition	Martin Lorenz (Lorenz)	OpenFOAM Running, Solving & CFD	33	December 21, 2020 05:59
mesh file for flow over a circular cylinder	Ardalan	Main CFD Forum	7	December 15, 2020 13:06
Wind turbine simulation	Saturn	CFX	58	July 3, 2020 01:13
Boundary Condition for Heat Transfer	wilko	OpenFOAM Running, Solving & CFD	0	October 12, 2009 17:58
Slip boundary condition what is inside	normunds	OpenFOAM Running, Solving & CFD	2	June 4, 2007 06:45

April 22, 2010, 07:27		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,697 Rep Power: 143	My guess (and it is only a guess) is that the profile data only supports velocity. Have you tried a 3D CEL interpolation cloud function? I think that should work in this case.

April 22, 2010, 13:09		#3
Hitch8 New Member Philipp Join Date: Apr 2010 Posts: 27 Rep Power: 16	Thank you very much for your answer, I found out how it works. You have to specify the variable under user defined functions, and then it works.