Wave equation, wave velocity components

mztcu · May 3, 2010, 15:10

Hello everybody
I am beginer cfx user. I want to simulation water wave. I looked for wave article and I found
Jan Westphalen's article. you can look to it in that link. www.research.plymouth.ac.uk/Cerg/field.../NuTTS2007_Westphalen.pdf

in the article
there are 2 wave equation I examined these equation. And I want use these equation but I dont understand (x,z) components in equation. what I must write in CFX expression for x and z.
I wrote that
U=2.943[m s^-1]*(cosh(0.52358[m^-1]*(z+10.25[m])) /107.07929)*sin(0.52358[m^-1]*x-2.6179[s^-1]*t)
w=2.943[m s^-1]*(sinh(0.52358[m^-1]*(z+10.25[m])) /107.07929)*cos(0.52358[m^-1]*x-2.6179[s^-1]*t)

I am sory for my english Thank for everythings

AliTr · May 4, 2010, 02:14

x and z are coordinate components, assuming you build a 2D model in XZ plane (with z showing vertical direction), you can use them in CFX as they are (x and z).
ps. don't forget that h is level not the depth.

May 3, 2010, 15:10	Wave equation, wave velocity components	#1
mztcu New Member onder Join Date: Mar 2009 Posts: 18 Rep Power: 17	Hello everybody I am beginer cfx user. I want to simulation water wave. I looked for wave article and I found Jan Westphalen's article. you can look to it in that link. www.research.plymouth.ac.uk/Cerg/field.../NuTTS2007_Westphalen.pdf in the article there are 2 wave equation I examined these equation. And I want use these equation but I dont understand (x,z) components in equation. what I must write in CFX expression for x and z. I wrote that U=2.943[m s^-1](cosh(0.52358[m^-1](z+10.25[m])) /107.07929)sin(0.52358[m^-1]x-2.6179[s^-1]t) w=2.943[m s^-1](sinh(0.52358[m^-1](z+10.25[m])) /107.07929)cos(0.52358[m^-1]x-2.6179[s^-1]t) I am sory for my english Thank for everythings

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Define an equation for the inlet velocity profile	Alshroof	CFX	3	January 9, 2007 19:34
Velocity in Porous medium : HELP! HELP! HELP!	Kali Sanjay	Phoenics	0	November 6, 2006 06:10
getting fluctuating velocity components at FLUENT.	Seyfettin	FLUENT	0	November 25, 2005 02:50
swirl velocity components	gopal	FLUENT	0	September 29, 2005 13:11
Code for solving inhomogenous wave equation	P	Main CFD Forum	4	April 1, 2005 04:12

May 4, 2010, 02:14		#2
AliTr Member Ali Torbaty Join Date: Jul 2009 Location: Sydney, Australia Posts: 72 Rep Power: 16	x and z are coordinate components, assuming you build a 2D model in XZ plane (with z showing vertical direction), you can use them in CFX as they are (x and z). ps. don't forget that h is level not the depth.