CFX problem - Parallel

nolebb · April 25, 2010, 14:30

I have problem with parallel solver. Serial works perfect, but parallel has status "Preparing run", and waits...and can't start. License is OK, I try on another computer and everything works perfect...Does anyone know where is the problem? Thanks!

ghorrocks · April 26, 2010, 19:03

There is a trouble shooting section in the documentation. Have you worked though that?

nolebb · April 27, 2010, 12:07

I will try to find. Thank you very much. If you know keywords for search, it would be fine... Thanks again.

ghorrocks · April 27, 2010, 18:27

Look in setting up the distributed parallel section, I think it is in the installation guide.

nolebb · April 27, 2010, 19:18

I need Local Parallel? Can it be different?

ghorrocks · April 28, 2010, 09:01

Local parallel is covered in the documentation as well. Try that first.

scott · April 29, 2010, 05:24

Do you have your computer connected to a network or active internet connection or is it standalone?

Sometimes you need an active internet or network connection for this to work as the licence looks for a network address, depending on if you are using HPMPI or MPICH2?

If it is connected then, your best bet is to read the manuals as people keep saying or contact your support provider.

Scott

April 25, 2010, 14:30	CFX problem - Parallel	#1
nolebb New Member Novica Join Date: Apr 2009 Posts: 7 Rep Power: 17	I have problem with parallel solver. Serial works perfect, but parallel has status "Preparing run", and waits...and can't start. License is OK, I try on another computer and everything works perfect...Does anyone know where is the problem? Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Surface of revolution problem in CFX Post	Mankim	CFX	3	January 5, 2010 05:38
Natural convection problem in CFX 11	Willy	CFX	2	May 23, 2008 23:12
Fan Modelling Problem in CFX	Jenny	CFX	8	September 11, 2007 13:59
CFX running problem	Michael	CFX	4	January 26, 2007 07:40
CFX 4.4 installation problem	Pandu Sattvika	CFX	1	December 1, 2001 04:07

April 26, 2010, 19:03		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	There is a trouble shooting section in the documentation. Have you worked though that?

April 27, 2010, 12:07		#3
nolebb New Member Novica Join Date: Apr 2009 Posts: 7 Rep Power: 17	I will try to find. Thank you very much. If you know keywords for search, it would be fine... Thanks again.

April 27, 2010, 18:27		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Look in setting up the distributed parallel section, I think it is in the installation guide.

April 27, 2010, 19:18		#5
nolebb New Member Novica Join Date: Apr 2009 Posts: 7 Rep Power: 17	I need Local Parallel? Can it be different?

April 28, 2010, 09:01		#6
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Local parallel is covered in the documentation as well. Try that first.

April 29, 2010, 05:24		#7
scott Member Scott Join Date: Sep 2009 Posts: 44 Rep Power: 16	Do you have your computer connected to a network or active internet connection or is it standalone? Sometimes you need an active internet or network connection for this to work as the licence looks for a network address, depending on if you are using HPMPI or MPICH2? If it is connected then, your best bet is to read the manuals as people keep saying or contact your support provider. Scott