CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   How to model blades that intersect each other? (http://www.cfd-online.com/Forums/cfx/76121-how-model-blades-intersect-each-other.html)

Adam1181 May 14, 2010 13:11

How to model blades that intersect each other?
 
I am trying to model fluid flow in a radial turbine that has the shroud side of the blade rounding forward and permanently connecting to the blade in front of it. I am using Solidworks for the design then importing into Ansys 11. I Have modeled the fluid domain and got good results from advanced CFD(ansys workbench), but I need to get rotational data. I have a few questions.

1. Is it possible to do this with Turbo grid? If so how do I define the shroud curves and what settings do I need?

2. If I can't use Turbo grid what can I use (ICEM CFD or advanced CFD)?

Any help would be greatly appriciated.

Attesz May 16, 2010 12:39

Experts are here: http://www.cfd-online.com/Forums/ansys-meshing/


All times are GMT -4. The time now is 02:44.