CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Definig BCs after importing mesh from gambit or ICEM (http://www.cfd-online.com/Forums/cfx/76413-definig-bcs-after-importing-mesh-gambit-icem.html)

alinik May 25, 2010 08:09

Definig BCs after importing mesh from gambit or ICEM
 
Hey guys

I have trouble defining BCs when I import a mesh file from gambit or ICEM CFD to ANSYS CFX.

Can anybody please help me?

feizaghaee May 30, 2010 06:44

what sort of problem do you have budy?
you question isn't clear.

alinik May 30, 2010 11:35

Hi
After I import a mesh generated in gambit into cfx, I should be able to define boundary conditions like inlet and outlet in simulation>fluid analysis>Default Domain>...
but I can not do it
In fact there is only one domain recognized and that is the whole fluid domain. I am not allowed to define anything here.

feizaghaee June 1, 2010 17:37

sometimes just one domain is enough. it's depend on your case. there must be different parts in your geometery so you can define BCs.


All times are GMT -4. The time now is 07:53.