CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Definig BCs after importing mesh from gambit or ICEM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 25, 2010, 08:09
Default Definig BCs after importing mesh from gambit or ICEM
  #1
Senior Member
 
ali
Join Date: Oct 2009
Posts: 157
Rep Power: 7
alinik is on a distinguished road
Hey guys

I have trouble defining BCs when I import a mesh file from gambit or ICEM CFD to ANSYS CFX.

Can anybody please help me?
alinik is offline   Reply With Quote

Old   May 30, 2010, 06:44
Default
  #2
Senior Member
 
feizaghaee's Avatar
 
moein
Join Date: Dec 2009
Posts: 132
Rep Power: 7
feizaghaee is on a distinguished road
Send a message via Yahoo to feizaghaee
what sort of problem do you have budy?
you question isn't clear.
feizaghaee is offline   Reply With Quote

Old   May 30, 2010, 11:35
Default
  #3
Senior Member
 
ali
Join Date: Oct 2009
Posts: 157
Rep Power: 7
alinik is on a distinguished road
Hi
After I import a mesh generated in gambit into cfx, I should be able to define boundary conditions like inlet and outlet in simulation>fluid analysis>Default Domain>...
but I can not do it
In fact there is only one domain recognized and that is the whole fluid domain. I am not allowed to define anything here.
alinik is offline   Reply With Quote

Old   June 1, 2010, 17:37
Default
  #4
Senior Member
 
feizaghaee's Avatar
 
moein
Join Date: Dec 2009
Posts: 132
Rep Power: 7
feizaghaee is on a distinguished road
Send a message via Yahoo to feizaghaee
sometimes just one domain is enough. it's depend on your case. there must be different parts in your geometery so you can define BCs.
feizaghaee is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
importing mesh from Gambit and other software to ansys workbench mortazavi CFX 13 May 30, 2012 10:00
problem when converting mesh (made by ICEM) using fluentMeshToFoam Forrest_Lei OpenFOAM 11 October 16, 2009 06:28
ANSYS ICEM CFD Mesh to Gambit Simon Bergström FLUENT 0 January 19, 2007 12:53
Importing a hex core mesh from Gambit dmoroian OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 0 September 15, 2006 03:54


All times are GMT -4. The time now is 19:52.