CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Conservative Interface flux

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 31, 2010, 12:19
Default Conservative Interface flux
  #1
Sas
New Member
 
Join Date: May 2010
Posts: 21
Rep Power: 7
Sas is on a distinguished road
Should convey heat radiation from the fluid to another fluid through the air, put the 2 interfaces with the regime - Conservative Interface flux. The air begins to heat up to 3000 K (!) for unknown reasons.
Conservative Interface flux takes into account whether the coefficient of absorption / emission given for materials?

Have I asked the type of interface?

http://depositfiles.com/files/c7djkwe0w (Heat transfer.cfx)


Last edited by Sas; June 1, 2010 at 08:17.
Sas is offline   Reply With Quote

Old   May 31, 2010, 18:28
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 10,652
Rep Power: 84
ghorrocks has a spectacular aura aboutghorrocks has a spectacular aura aboutghorrocks has a spectacular aura about
Can you explain what you are trying to model again?
ghorrocks is offline   Reply With Quote

Old   June 1, 2010, 08:20
Default
  #3
Sas
New Member
 
Join Date: May 2010
Posts: 21
Rep Power: 7
Sas is on a distinguished road
Quote:
Originally Posted by ghorrocks View Post
Can you explain what you are trying to model again?
I simulate the heating of the upper domain (1) through the air (2) of the domain (3).
In the upper domain (1) moves the material from the initial temperature 1000 C, the air domain (2) moves with the initial temperature of 450 C.
In the domain (3) flowing the heated gas with a temperature of 2000 C.

Must be correctly configured interefeysy between domains so that the top domain (1) received warmly by heat and radiation and, accordingly, he could transfer heat.
Sas is offline   Reply With Quote

Old   June 1, 2010, 18:38
Default
  #4
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 10,652
Rep Power: 84
ghorrocks has a spectacular aura aboutghorrocks has a spectacular aura aboutghorrocks has a spectacular aura about
So domain 1 is a solid, domain 2 is a fluid (air), and what is domain 3?
ghorrocks is offline   Reply With Quote

Old   June 2, 2010, 00:39
Default
  #5
Sas
New Member
 
Join Date: May 2010
Posts: 21
Rep Power: 7
Sas is on a distinguished road
Quote:
Originally Posted by ghorrocks View Post
So domain 1 is a solid, domain 2 is a fluid (air), and what is domain 3?
all domen fluid.

in 1 domen - sand (viscous as water)
in 2 domen - air
in 3 domen - hot gaz.

Last edited by Sas; June 2, 2010 at 07:25.
Sas is offline   Reply With Quote

Old   June 2, 2010, 08:44
Default
  #6
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 10,652
Rep Power: 84
ghorrocks has a spectacular aura aboutghorrocks has a spectacular aura aboutghorrocks has a spectacular aura about
You clearly have not set up the thermal conditions correctly. You must have missed something to take the heat away from the air. I don't have time to do a detailed debug of your simulation, sorry.
ghorrocks is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 34 October 16, 2014 05:27
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
Concentric tube heat exchanger (Air-Water) Young CFX 5 October 6, 2008 23:17
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55
Replace periodic by inlet-outlet pair lego CFX 3 November 5, 2002 21:09


All times are GMT -4. The time now is 17:40.