CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   One surface, two interface, is possibile? (http://www.cfd-online.com/Forums/cfx/77020-one-surface-two-interface-possibile.html)

fabioxyz June 10, 2010 10:09

One surface, two interface, is possibile?
 
Hi all,
my question is if is possible in CFX set two different interface for a single surface ? By default cfx says that there is a problem: same surface for 2 boundary condition. But how do you simulate a problem same mine?
the picture explain the problem. The upper surface of Body A is in contact with air (body B) and another solid body ( Body C). body C is hot and i want simulate the distribution of temperature in body A so body A has 2 interface: one with body B and one with body C ...how set up cfx-pre?
Thank you

http://img638.imageshack.us/img638/48/testzf.jpg

ghorrocks June 10, 2010 18:24

You have to split the interface on solid A into two sections. One section interfaces with B and the other with C. You cannot have a single surface interface with multiple domains.

Pocket June 11, 2010 13:34

Maybe you could just use both downward faces of body C and Fluid B in the same Domain Interface definition.

Worked for me, but i connected one fluid domain face with two faces of separate solid domains.

Alternatively, have you thought about building both solids as one model and defining the hot part as a subdomain? Might be another workaround.

fabioxyz June 15, 2010 03:03

thank u, now i try the second Pocket's solution :)


All times are GMT -4. The time now is 04:28.