CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Design gas turbine blades with film cooling and cooling Impingement in Ansys 12.0 (http://www.cfd-online.com/Forums/cfx/79364-design-gas-turbine-blades-film-cooling-cooling-impingement-ansys-12-0-a.html)

pedrin84 August 21, 2010 16:16

Design gas turbine blades with film cooling and cooling Impingement in Ansys 12.0
 
Can help me to draw gas turbine cooled blades in the software ANSYS 12.0 CFX, in the Bladedesign or BladeGen, in WORKBENCH, to simulate in ANSYS CFX 12.0. Somebody have any handbook or manual of Bladedesign or BladeGen 12.0 ?. I appreciate any response. Greetingsˇˇˇ

Josh August 24, 2010 19:49

Hi Pedro -

You should post this in the Geometry section: http://www.cfd-online.com/Forums/ansys-meshing/

pedrin84 August 25, 2010 12:22

Thanks you. do you can help me?

Josh August 25, 2010 14:07

I'm afraid not. I'm a relatively inexperienced CAD user, but this is a CFD forum. Post your topic on the Geometry forum - you'll have much better luck.


All times are GMT -4. The time now is 02:46.